OptoSLT nano

(Slit Lamp)


Details:

THE FIRST 1 NS SLT DEVICE ON THE MARKET

Selective Laser Trabeculoplasty (SLT) is an advanced, non-invasive, primary or secondary treatment for raised intraocular pressure (IOP) in glaucoma. It uses short laser pulses of a specific wavelength to selectively target pigmented trabecular meshwork cells without causing widespread thermal damage. Standard SLT utilises a low-energy laser with a short pulse duration of 3-5 ns. This low-energy irradiation stimulates removal of damaged cells by macrophages and increases trabecular network porosity to restore effective aqueous outflow through the drainage angle. This results in the reduction of IOP to non-pathologic levels.

THE FIRST DIODE PUMPED SOLID STATE LASER DEVICE ON THE MARKET FOR SLT

The OptoSLT nano is a new laser technology that is superior to existing SLT devices on the market. It offers very high pulse to pulse stability (±2.5%). By reducing laser pulse duration to 1 ns without compromising efficacy outcomes, this new technology permits faster (up to 5 Hz) and safer SLT procedures (improved pulse energy repeatability during SLT).

With a compact, highly portable design, the OptoSLT nano is an ideal addition to every doctor’s practice. The device’s energy levels range from 0.2 to 2.0 mJ and its red diode 635 nm aiming beam ensures precise focusing for highly predictive and effective treatment each and every time.

The OptoSLT nano offers a shorter-than-standard laser pulse duration of just 1 ns, with advanced technology in the form of a more stable and efficient solid-state diode–pumped laser technology, thus offering a quicker and safer SLT treatment option.


Features:

DIODE PUMPED SOLID STATE LASER SOURCE - DPSS (FOR MAXIMUM EFFICIENCY AND SAFETY)

The OptoSLT nano features a diode-pumped solid state laser source that offers greater compactness and efficiency than the flash lamp-pumped solid state laser source used in classic SLT devices currently available on the market. The compact and miniaturized solid state laser used in the OptoSLT nano offers additional safety and reliability benefits.

PPS™ - PULSE TO PULSE STABILITY (FOR BETTER ENERGY STABILITY AND FASTER SLT TREATMENT)

The new device utilizes PPS™ technology to achieve a very high pulse to pulse stability of ±2.5%, which exceeds that of other existing laser technologies. This technology permits faster SLT procedures (up to 5 Hz) that are even safer compared to current technology on the market (due to improved pulse energy repeatability during SLT treatment).

MULTIFUNCTIONAL WITH SLIT LAMP COMPATIBILITY (USE AS COMPLETE DEVICE OR TO UPGRADE EXISTING SLIT LAMP)

The OptoSLT nano has been designed with a sophisticated dual set up. This allows seamless incorporation into any practice as a complete stand-alone device with lifting mechanism and slit lamp or added as an upgrade to most Haag Streit-type, and many Zeiss-type slit lamps on the market.

COLOR DISPLAY (FOR EASE OF USE)

The OptoSLT nano has been designed with ease of use in mind. Its advanced color display is easy to understand and navigate, giving the physician total confidence at all times.

PERSONALIZED DEVICE ACTIVATION (FOR COMPLETE SAFETY)

The laser device is protected with a secure personalized activation system, preventing unauthorised usage. All users must enter a 3 digit electronic key code to activate the device.

INNOVATIVE DOCKING STATION PLATFORM (TO MEET THE NEEDS OF THE USER)

An innovative design allows the user to easily switch between the therapeutic and diagnostic modes of the device.

MOBILE AND PORTABLE (FOR ULTIMATE CONVENIENCE AND PRACTICALITY)

The OptoSLT nano has a sleek compact design for maximum user convenience. Ophthalmologists can pack the laser device into a small suitcase and transport it to another operating room or hospital with maximum ease and minimal fuss.

Slit Illumination
Laser source Q-switched frequency doubled diode pumped Nd:YAG solid state laser
Accessories
Optional Accessories Optotek OEM Haag Streit – type slit lamp, motorized lifting mechanism, footswich, five-position magnification changer, gonioscopic SLT lens
Others
Aiming Beam Red diode 635 nm
Max. repetition rate 5 Hz
Pulse Mode Single pulse
Spot Size 400 µm
Wavelength 532 nm
Power Supply 100/240V, 50-60 Hz
Dim./Weight 29 x 17 x 18 cm (laser head and docking station) 5,4 kg (laser head and docking station)
Standard Accessories Safety eyewear, elbow rest support, dust cover

OptoSLT nano

  • Brand: Optotek
  • Product Code: optoslt-nano
  • Availability: In Stock

  • Weight: 5.40kg
  • Dimensions: 180.00 X 170.00 X 290.00 mm

Related Products

S350C - Slit Lamp - 2x

S350C - Slit Lamp - 2x

S350C (Slit Lamp - 2x) Features: MediWorks adopts converging stereoscopic microscope used in th..

S350 - Slit Lamp - 5x

S350 - Slit Lamp - 5x

S350 (Slit Lamp - 5x) Features: Classic Galilean type microscope Total magnification ratio: 6X..

S350S - Slit Lamp - 3x

S350S - Slit Lamp - 3x

S350S (Slit Lamp - 3x) Features: Classic Galilean type microscope Total magnification ratio: 1..

S390H - Slit Lamp - 5x with video system

S390H - Slit Lamp - 5x with video system

S390H (Slit Lamp - 5x with video system) Features: Auto Focus / ISO Auto Exposure Auto White ..

Dry eye diagnostic system

Dry eye diagnostic system

Dry eye diagnostic system Description: Easy Pathogenic Diagnosis, Providing guidance for customi..

Tags: opto, slt, nano, optotek, medical, visional